DIY Flower Tile Coaster
Aside from my children’s bedroom, my favorite room in our farmhouse is my master bathroom. I adore the black and white hexagonal tile so much in my bathroom that I wanted to highlight it in other areas of my house. That is how I got the inspiration for today’s very simple, inexpensive, and customizable flower tile coaster. You can make a lot of coasters from one sheet of hexagonal tile as a gift for your friends or for your side table. You can also change the shape and the colors to your liking.
I am especially excited to show you today’s tutorial because I included a video below to showcase the steps in more detail. You can also follow along in the post below with pictures. I hope you enjoy making your own DIY coasters.
*This post contains affiliate links. For more information, please see my disclosure page here.
To make your own flower tile coaster, you will need:
*Some housekeeping before we start. There is a lot of downtime waiting for the paint and mod podge to dry. This project will go by faster if you batch work each step before you move on to the next step. Also, it is very important to complete all the steps (especially step 8) if you plan to use hot beverages on your coaster.
Step 1: Paint one coat of the craft paint onto the top and sides of the cork coaster.
Step 2: Set the cork coaster aside to dry.
Step 3: Use the X-Acto knife and cutting board to cut out the coaster into the desired shape. I chose a flower to mimic my bathroom floor.
Step 4: Trim the tile glue.
Step 5: Apply one coat of the craft paint onto the tile to create your favorite look. Set aside to dry.
Once the first coat dries, apply a second coat of craft paint to the tile. Then set aside to dry.
Step 6: Once the paint on the tile and coaster are dry, apply hot glue to the back of the tile and attach it to the cork coaster.
Step 7: Apply one coat of mod podge with the foam brush. Set aside to dry completely.
Step 8: After the mod podge dries (in a well ventilated area) spray one coat of the Rust-Oleum Painter’s Touch 2X Ultra Cover Matte Clear onto the coaster.
*This step is very important if you plan to use hot beverages on your coaster, because the spray finish will allow for the coaster to sustain up to 200 degrees Fahrenheit.
Step 9: Sit back with a warm cup of coffee or a cold beverage, and enjoy your final product!